10 Industry
Compressed air system monitoring
Compressed air is the consumption nobody sees, because it has no meter. Give it one.
Illustrative figures.
What NeMo reads
The quantities that matter
The compressors run even when production has stopped, and the gap between what they make and what is used leaves through the holes in the pipework without ever showing on the bill.
Flow and pressure
On the line, because without flow compressed air stays a bill with no denominator.
Draw per compressor
Machine by machine, the level at which you see which one is working for the others.
Loaded and unloaded
Loaded against unloaded hours: the ratio between them is the fastest diagnosis available here.
Temperature and dew point
Dew point says whether treatment is holding or consuming for nothing.
Receivers
Buffer levels, which show whether the network is sized or chasing peaks.
How it connects
It speaks your field’s language
Meters, analysers, controllers and probes: the node connects to what is already installed, over the protocol it already speaks. Nothing in the field is replaced to get started.
Powered on and already talking — self-configuring in the fieldWhat comes out
From the reading to the decision
kWh per Nm³
The real cost of air, which almost nobody knows and almost everybody underestimates.
Leaks
Measured while production is stopped, when everything still running is loss.
Compressor sequence
Machines starting in the wrong order, visible in the data rather than by ear.
Sizing checked
Against real consumption, before buying the extra machine.
Nearby industries
They usually come together
Start from your plants
A 30-minute technical call to go through what you already measure, what you do not, and what it would take to close the gap.