12 Industry
Metering for renewable energy communities
NeMo sits under the community manager, not in its place: it brings the quarter-hourly readings from every meter point, so the split rests on data instead of estimates.
Illustrative figures.
What NeMo reads
The quantities that matter
A community lives on shared energy, which is the minimum of what is fed in and what is drawn in the same hour. If the readings arrive late or aggregated, the split becomes an estimate, and the members’ trust goes with it.
Import and export
Quarter-hourly per meter point, the resolution sharing is computed and valued at.
Community output
The community's own plants, read directly rather than inferred from meters.
On-site self-consumption
What never reaches the exchange meter, and changes everyone's numbers.
Storage
Where present, because it moves energy in time and therefore moves the split too.
How it connects
It speaks your field’s language
Meters, analysers, controllers and probes: the node connects to what is already installed, over the protocol it already speaks. Nothing in the field is replaced to get started.
Powered on and already talking — self-configuring in the fieldWhat comes out
From the reading to the decision
Shared energy
Hour by hour, on the same time base it is recognised on.
Contribution per member
What each one puts in and takes out, with a calculation that can be re-run and checked.
New-member simulation
What would change with one more member, on real consumption rather than standard profiles.
A verifiable history
The series the split rests on, open to whoever disputes it.
The Chain 2 channel on second-generation meters is the way in. No need to wait for a DLMS implementation: gateways exist that expose it over Modbus.
Nearby industries
They usually come together
Start from your plants
A 30-minute technical call to go through what you already measure, what you do not, and what it would take to close the gap.