06 Industry
Battery energy storage monitoring
State of charge, health and cycles read from the BMS alongside the power exchanged, so you know what the battery is actually worth after two years.
Illustrative figures.
What NeMo reads
The quantities that matter
The battery degrades, the warranty talks about cycles and remaining capacity, and the data you need to claim or renew sits inside a BMS nobody polls continuously.
Charge and health
State of charge and state of health read from the BMS, the only thing that really knows them.
Cycles and depth
Completed cycles and depth of discharge — the two quantities the warranty is written on.
Cells
Temperatures and voltages, where an imbalance foreshadows degradation of the whole pack.
Power
Charging and discharging, to compare the energy returned with the energy put in.
Alarms and derating
When the system limited itself, and for how long it did.
How it connects
It speaks your field’s language
Meters, analysers, controllers and probes: the node connects to what is already installed, over the protocol it already speaks. Nothing in the field is replaced to get started.
Powered on and already talking — self-configuring in the fieldWhat comes out
From the reading to the decision
Capacity degradation
The real trend over time, which is the difference between a warranty discussion and an opinion.
Round-trip efficiency
Energy out over energy in, measured rather than quoted from a datasheet.
Availability
How much of the time the system was genuinely usable, alarms and derating included.
History for the warranty
Continuous per-device series, useful at exactly the moment they are needed.
Nearby industries
They usually come together
Start from your plants
A 30-minute technical call to go through what you already measure, what you do not, and what it would take to close the gap.